Mystery hole in windshield

Mike_B · Post by **Mike_B** » Sat Jan 01, 2022 12:36 pm

The top center of my A1 windshield frame has a reinforcement plate spot welded in place. The plate supports/anchors the hood catch lock via two 1/4-20 bolts. At the very top of that plate there is a 1/8" hole that goes through the plate and the sheet metal...is that a factory hole or Bubba?

Happy New Year!

Mike B

OKCM38CDN · Post by **OKCM38CDN** » Sun Jan 02, 2022 10:08 pm

May be a place the windshield wiper plumbing was attached to. Bubba or Military, only thing I can think of using that hole... Will look at mjne in the AM...

Xamon · Post by **Xamon** » Mon Jan 03, 2022 10:38 am

if it is in the middle it could have been for a mirror. I think this was talked about before.

Mike_B · Post by **Mike_B** » Wed Jan 05, 2022 9:40 pm

I don't think it's for a mirror, it's up high and only big enough for a #6 screw to fit in it.

I'm thinking Buba because it goes through the front face sheet metal and 10 guys haven't jumped in to all say it's for X...

Mike B