Page 1 of 1
generator id
Posted: Tue Jan 17, 2017 9:54 am
by 4x4M38
Can someone help me ID this generator I bought with a bunch of parts?
http://willysmjeeps.com/v2/modules/gall ... .sized.jpg
Thanks!
Posted: Tue Jan 17, 2017 4:17 pm
by wesk
Posted: Tue Jan 17, 2017 5:01 pm
by 4x4M38
The data plate is missing Wes.
It has Ford in script stamped on the case, and I found 8BA under the
bracket which is bolted around the case with a strap, versus on the front.
Posted: Tue Jan 17, 2017 5:22 pm
by wesk
Posted: Tue Jan 17, 2017 6:09 pm
by 4x4M38
The bracket looks like the one in the second photo.
I'm guessing it is 6 volts?
Thanks for the help!
Posted: Tue Jan 17, 2017 10:47 pm
by wesk
You could drop it at a nearby auto-electric shop and have them bench check for you.
Or like me just keep an old electric AC motor with a pulley under your bench. When you have the need just clamp the generator or alternator to the bench or in a vice and clamp the motor next it on the bench Wrap a belt around the pulleys and slide the motor away to tighten it. Then with a 6 volt battery connected to the generator ground and + to field measure the output when you full field the generator momentarily with a volt meter connected to same ground and the A terminal. If she's a good 6 volter she'll top out at about 8 volts in 2 or 3 seconds. If she keeps going higher then probably a 12 volter.