Page 1 of 1
Speedo drive cable
Posted: Thu Jul 19, 2018 5:18 pm
by ROBCDN3
On my M38a1 speedo the drive cable has different ends one is square and the other is a long pointy one. which end goes where , to trans and to the speedo. 71 M38a1 cdn 3 c Rob Thanks in advance
Posted: Thu Jul 19, 2018 10:37 pm
by wesk
Square in the speedo and pointy long one with small fin in the drive gear.
This illustrates connecting the stock drive gear to a sender for an electric speedo but the shortened drive cable accurately represents the tips of the stock cable.
Posted: Fri Jul 20, 2018 6:56 am
by ROBCDN3
Thanks Wes My speedo is the problem then it has a round hole , must have been damaged years ago speedo was always very bouncy.
Rob 1971 M38a1cdn3c
Posted: Fri Jul 20, 2018 8:29 am
by wesk
The entrance to the square drive hole is round on all of them.
Posted: Sun Jul 22, 2018 7:19 pm
by ROBCDN3
Thanks Wes Mine started working again will leave it alone till it stops 71 M38a1 cdn3 c Rob