Page 1 of 1
Help identifying 11" brake components on M38a1
Posted: Sat Apr 17, 2021 8:12 pm
by VTM38a1
My M38a1 has an 11" brake conversion. I need to replace the wheel cylinders, shoes and drums but don't know what vehicle my brakes are from. The drum has the number 35582, the shoes 41717 and the wheel cylinder has no number but is a 1 1/8 inch bore. Sorry but I don't know how to attach a pic here.
Posted: Sat Apr 17, 2021 9:16 pm
by jake138
Could be 11" drums from a '72 CJ5.
Front wheel cylinders:
RAYBESTOS WC18290
RAYBESTOS WC18291
Both are 1 1/8" bore.
How wide are the shoes?
Posted: Sat Apr 17, 2021 9:27 pm
by VTM38a1
2 inches wide. These are the rear brakes btw. Someone on Steel Soldiers thought the brakes might be 60's Ford F100.
Posted: Sat Apr 17, 2021 9:49 pm
by wesk
This is a very good time to learn how to post photos here. A picture is and always will be worth a thousand words! Without them you have offered us very, very LITTLE INFO to offer any advice on. Did you offer your steel soldier's post with photos?
It is easiest to post photos here with your own album here but you can post photos here easily from other on line albums. This current version of our Forum's software does not allow posting directly from your personal computer files.
Here's your album:
http://www.willysmjeeps.com/v2/modules. ... _album.php
Here's the rules:
http://www.willysmjeeps.com/v2/modules. ... opic&t=498
Here's the tutorial for loading your album:
http://www.willysmjeeps.com/v2/modules. ... _album.php
Here's the tutorial for posting your photos:
http://www.willysmjeeps.com/v2/modules. ... pic&t=8670
Posted: Sun Apr 18, 2021 10:10 pm
by 85jeepcj
Wesk
what is the number and size brake cylinder for the rear.
11 x 2 inch shoes
Thanks
Posted: Sun Apr 18, 2021 11:27 pm
by wesk
what is the number and size brake cylinder for the rear.
11 x 2 inch shoes
I would need to know:
1 - Make, year model installed on?
2 - Are these a stock installation?
3 - If they are not stock then name of manufacturer of modification kit and part number of the modification kit.
Posted: Mon Apr 19, 2021 8:10 am
by Xamon
I did a bunch of poking around. Now not saying this is correct but I have found suggestion that they may be from the front of a 67 for longbox. Definitely get a lot of ford hits for those numbers. Take this as you will. Perhaps your local parts place might have some on hand to compare with, probably not but you don't know without asking.