What's the easiest way to install a new rear bumper on my 1952 M38 CDN.
Do I need to completely remove the steel plate where the pintle hook attaches, then weld it back in????
Thanks
Peter (ottawa)
Install New rear Bunper M38 CDN
-
boucher
- Member
- Posts: 33
- Joined: Sun Jan 22, 2006 6:00 pm
- Location: Ottawa, Canada
-
M38CDNBill
- Contributor
- Posts: 133
- Joined: Tue Feb 20, 2007 6:00 pm
- Location: Trois-Rivieres, Canada
Hi Peter,
The only way to replace the rear cross member is effectivaly remove the steel plate. To remove this plate, cut the soldered joint around with a grinder and weld it back in after the new rear cross member is on it's place.
Best regards from Trois-Rivieres
The only way to replace the rear cross member is effectivaly remove the steel plate. To remove this plate, cut the soldered joint around with a grinder and weld it back in after the new rear cross member is on it's place.
Best regards from Trois-Rivieres
Guy aka M38CDNBill
1945 Willys MB
1945 Chevrolet G7107 (in progress)
1945 Willys MB
1945 Chevrolet G7107 (in progress)