Page 1 of 1
Still Need Frame Info 53 M38 CDN
Posted: Sun Oct 28, 2007 7:06 am
by boucher
Anyone know the dimensions for the frame part that the brake return spring attaches (height/shape/size of hole/etc...) ???
I welded a piece on but need to shape it to the correct dimensions.
Thanks, Peter (Ottawa)
Posted: Tue Nov 06, 2007 7:31 pm
by Ryan_Miller
Anyone have this info?
Can you get these new?
Posted: Tue Nov 13, 2007 10:41 am
by remi_emond
is it the brake return spring bracket or the engine stay cable bracket?
Remi
St-Nicolas, QC
Posted: Tue Nov 13, 2007 1:10 pm
by wesk
Posted: Tue Nov 13, 2007 4:36 pm
by Ryan_Miller
I think you can get those new from some of the jeep parts suppliers can't you?
Posted: Mon Nov 19, 2007 7:52 am
by boucher
Thanks for the info.
Now that I know it's for the engine stay cable, does anyone know where the other end of the cable attaches?
Thanks ,
Peter (Ottawa)
Posted: Mon Nov 19, 2007 8:19 am
by remi_emond
it attache to the lower left of transmission bell housing.
Remi
Posted: Mon Nov 19, 2007 9:31 am
by wesk
The front end of the stay cable is actually a bolt and threads thru the left lower bolt hole of the bell.
It's the really long set of threads in the upper right of this photo
