Page 1 of 1
exploded view of M38 card.
Posted: Mon Dec 01, 2008 8:16 pm
by shack
Hey guys,
Im still learning my way around the manual downloads so could someone point me toward the carburator breakdown guide? Or tell me which manual it's in? I'm going to try my hand at rebuilding one!
Thanks a lot,
shack
Posted: Tue Dec 02, 2008 12:29 am
by wesk
Posted: Wed Dec 03, 2008 11:55 am
by whydahdvr
Wes and everyone, this may be a silly question but how difficult is it for someone with no real experience of working on a carburetor to adjust the float on the carb here? From reading the TM and this link it seems fairly simple but not having done it before.... Thanks.
-Josh
Posted: Wed Dec 03, 2008 3:35 pm
by Rick_L
Its not hard, just make sure you have another gasket set on hand.
Posted: Wed Dec 03, 2008 6:51 pm
by whydahdvr
That makes sense so I should get one before I start. Thanks! What about the bending of the lip of the float?
Posted: Wed Dec 03, 2008 7:43 pm
by Rick_L
I don't remember it taking much pressure, just a screwdriver with a head thin enough to fit under it.