willysmjeeps.com

Posted: **Tue Feb 17, 2009 10:56 am**

Hi would anyone know the thickness of a m38 fuel pump spacer thanks. I have one which is 5.80 mm but when i fit the pump the engine locks up while turning by hand also the hand primmer lever will not move correctly works ok when of the engine. THANKS

Posted: **Tue Feb 17, 2009 3:33 pm**

Looks like your spacer is too thin. The correct spacer is 9/16" or 0.5625" or about 14.1MM. Also make sure you have the pump's arm under the cam lobe.

WO PN 800361, ORD PN 8329708

Posted: **Tue Feb 17, 2009 4:53 pm**

thanks wesk.