Page 1 of 1
Carburetor ID tag
Posted: Thu Mar 05, 2009 2:32 pm
by TomM
What were the ID letters stamped on the original M38 YS carb IT tag that is shown in the manuals.
This is the little thin aluminum triangular carb tag that is attached to one of the bowl screws.
Picture of an original?
Tom
Posted: Fri Mar 06, 2009 7:41 am
by whydahdvr
My jeep has a CSMS tag stamped and similar to what you describe. That indicates when the carb went through maintenance or rebuild at the local Army CSMS. I'm sure Wes or Ryan could shed more light on that for you though.
tag
Posted: Fri Mar 06, 2009 8:03 am
by TomM
does it look like the one on this WO carb? sitting on the bowl cover lower right.
http://www.jpmagazine.com/howto/21938/index.html
the article says it is marked 636
Posted: Fri Mar 06, 2009 8:29 am
by wesk
Hello Tom,
I've been hunting for a file photo I had which closeups the tag on an NOS carb. The one you linked is the correct shape and style but the nomenclature on it is for the 636 series WO only.
Posted: Fri Mar 06, 2009 9:04 am
by Ryan_Miller
Hey,
Here is a photo of a tag.
Posted: Fri Mar 06, 2009 9:46 am
by wesk
That's the one!