Page 1 of 1
slotted plate on tailgate
Posted: Mon Aug 08, 2005 10:56 pm
by Cacti_Ken
Does the M38 tailgate suppose to have a slotted plate attached to it for the jerry can strap? If so where might I find one?
Posted: Tue Aug 09, 2005 3:46 pm
by OKCM38CDN
My M-38 CDN does... You probably could make one out of stock material...
Where the strap attaches to the tailgate... not a great picture but that is where it goes.
Hope This Helps...
Posted: Tue Aug 09, 2005 7:45 pm
by GregS
Ken,
This is a good photo Pat Newman sent me once. I have a couple more if needed.
Greg
Posted: Wed Aug 10, 2005 8:22 pm
by Cacti_Ken
Thanks guys, I'll see if I can make something that will work. It's hard to tell what the dimentions are from the photo, but maybe it will work out.
Posted: Thu Aug 11, 2005 7:36 am
by GregS
Well, if you have a strap you can see the slot is just slightly bigger than the strap and the metal on each side of the slot is about 1/4".