Page 1 of 1
How far does your break pedal move?
Posted: Thu Jan 21, 2010 11:20 am
by linx310
I can't tell if mine on my M38A1 is correct. I looked at the manual and have the long free play adjusted out of it. Now my pedal only moves a couple on inches when I press down on it. It seems to stop ok, I was even able to screech the tires in one stop test.
Does any one have any video showing the travel of their break pedal?
When I get home tonight I will try to take a video of mine.
Posted: Thu Jan 21, 2010 11:49 am
by wesk
Vertical free play about 0.5". Corrected from 1.5"
Sideways more than an inch and you should start looking at a bushing kit and washer adjustments. Theres some data in the downloads on the pedal fitment.
Posted: Thu Jan 21, 2010 4:03 pm
by linx310
Here is a video of how far my pedal moves
http://www.youtube.com/watch?v=ulEvBFOdFQ4
About 3/4 of inch with the free play taken out.
Posted: Fri Jan 22, 2010 12:44 am
by wesk
I corrected my typo above. What you have will work ok. How much side play or rock does the pedal have?
Posted: Fri Jan 22, 2010 7:15 am
by linx310
I corrected my typo above. What you have will work ok. How much side play or rock does the pedal have?
Very little.
Posted: Fri Jan 22, 2010 8:31 am
by wesk
Then you are good to go. Is your clutch pedal free play set correctly at 1.5"?