willysmjeeps.com

Posted: **Thu Jun 16, 2011 6:23 pm**

match up with my M38A1? I'm guessing no, what with the different transfer case and all

Posted: **Thu Jun 16, 2011 7:50 pm**

Those 8 and 10M Lb Bradens are too heavy for the jeep.

Posted: **Thu Jun 16, 2011 10:09 pm**

This is what I'm looking at. They say it's only like a 4,000 lb winch
http://cgi.ebay.com/ebaymotors/WWII-WC- ... leQ5fParts

Posted: **Fri Jun 17, 2011 9:47 am**

Actually, they guessed it was in the 4000 to 5000 Lb pull rating. They do not even know the make & model number of the winch. If you really want to put that winch in your jeep then contact that seller and send him this thread link and have him give you dimensions A, B & C in the photo and then ask him for the Make and Model number of the winch.

The jeep has several mechanical winches available that were designed for it in both fit and pull capacity.

1-Original military Ramsey 50 and 50R
2-Ramsey civvy 200 series (reguires modification of exhasut on M38/M38A1)
3-Koenig 100 series (reguires modification of exhasut on M38/M38A1)

Posted: **Fri Jun 17, 2011 11:57 am**

Thanks Wesk. They want too much for it anyways. I'll keep looking.

Posted: **Fri Jun 17, 2011 12:17 pm**

If you think $1500 to $2500 is too much wait till you find a Ramsey 50. 50R or 200! Depending on condition and completeness those winches with PTO's and drive shafts = $2500 to $5000.

Posted: **Fri Jun 17, 2011 10:03 pm**

I know-I've seen them for $2,500 and up. Do you know what else works besides a Ramsey 50, and the Koenig winches?

willysmjeeps.com

Do the Dodge WC series 1/2 ton PTO winches

Do the Dodge WC series 1/2 ton PTO winches