Page 1 of 1
Door frame question
Posted: Wed Aug 10, 2011 10:52 pm
by 11cgrunt
According to the catalog for Beachwood canvas the door frames are the same for the m38 and the m38a1. Is this true?
Matt R
Doors
Posted: Thu Aug 11, 2011 8:11 am
by ocwd
I am pretty sure that the two are different. I have a couple of door frames and an M38A1 on my side yard. One of the frames is the folding type and does not match up to the angle of the windshield on the M38A1. Maybe someone else knows better.
Door frames
Posted: Thu Aug 11, 2011 10:04 am
by Kendall
I tried looking-up the door frames in the SNL and found for G-740 (M38) listings for DOOR, folding, left (and right), assy and DOOR left (and right), assy. In SNL G-758 (M38A1) the only listings are for DOOR, left (and right) assy for M170. No listings for M38A1 doors?
Kendall
Posted: Thu Aug 11, 2011 1:13 pm
by STXM38A1
Page 115 of TM 9-2320-208-20P (M38A1) [available in downloads] lists the doors and side curtains for the M38A1. I don't know if it gives enough info to answer your question, though.
Posted: Thu Aug 11, 2011 2:45 pm
by evanso1975
A quote from a vendor in the UK:
"M38A1 DOORS AND CURTAINS Again the description for the M38 doors and curtains is almost the same for M38A1 except for the forward lower edge of the door which is held to the body with 4 turnbuttons."
I guess the turnbuttons they refer to replace the rope channel on the M38 doors...........
Wbr,
Owen.
Posted: Thu Aug 11, 2011 6:29 pm
by Phil4280
Hi there!
I was looking at the Beechwood site last night and i recall what they showed was just the metal frame for the doors and not covered so may be frame is the same just the canvas covering is different????
Phil...