Page 1 of 1

Unstable ideling

Posted: Tue Jun 12, 2012 2:10 pm
by Nuffe
I have a M38 1950, with 24V electric, and most details orig.
Bur carburettor is from CJ-2A 1947.
My problem is unstable ideling.
Some days ideling is perfect,
next day no idle.
Other days varying idle.
Where shall I look/do to undersand what to do?
please help!

Thomas Bjorkman, Sweden

I think somone have imported My M38 from a US Military
depot in Euroup.
M38 are very rare in Sweden.

Posted: Tue Jun 12, 2012 6:41 pm
by oilleaker1
Clean fuel only, clean out the carburator, no vacuum leaks at the carburator base gasket. John

Posted: Tue Jun 12, 2012 6:50 pm
by wesk
In addition to John's suggestions above: Check throttle shaft for looseness. When the holes in the throttle body wear a lot you get an uneven idle that will clear up a bit when the hole gets dirty enough but when a period of high vacuum occurs and sucks the dirt out then the rough idle is back.