willysmjeeps.com

Posted: **Mon Sep 17, 2012 1:36 pm**

Does anyone have a photo of the M38 fuel cap guard fitted to the side panel?
Mine sits up at an angle, so the top of the guard sits close to the fuel cap. Is this correct, or should it sit out parallel to the body, like this:

Like I said, mine is angled up towards the filler neck, but Bubba might have got there before me.

Thanks in advance,
Owen.

Posted: **Mon Sep 17, 2012 1:50 pm**

Owen, mine is 90 deg to the tub as in your drawing. However it is
not level front to rear with it rising aprox 1" front to aft.

Posted: **Mon Sep 17, 2012 2:09 pm**

Wow, that was fast! Thanks Rick.
Time for the propane torch's powers of persuasion.

Posted: **Mon Sep 17, 2012 2:11 pm**

Ummm.. Be sure to remove the fuel cap guard and take it far from the
fuel tank before lighting the torch!!

Posted: **Mon Sep 17, 2012 2:15 pm**

90* but like Rick said upward on the aft end

Posted: **Mon Sep 17, 2012 2:49 pm**

Thanks for the photo Brett!

Ummm.. Be sure to remove the fuel cap guard and take it far from the
fuel tank before lighting the torch!!

Good safety tip. I don't fancy being a rocket-propelled jeep owner.

Posted: **Tue Sep 18, 2012 9:19 am**

Here's another photo for reference: