Page 1 of 1
Master cylinder heat shield
Posted: Thu Apr 11, 2013 2:18 pm
by jeeptj1
I might have been having a senior moment but was there a thread on the spec of the master cylinder heat shield that listed the dimensions and stuff. Thanks John jr
Posted: Thu Apr 11, 2013 8:26 pm
by Bretto
If you are trying to make one, there is a guy on the 2a page that has a PDF drawing of one for the 2A but it will work for the M38. I made mine from it.
http://www.thecj2apage.com/forums/heat- ... eld#224706
http://www.thecj2apage.com/forums/heat- ... eld#174310
Posted: Thu Apr 11, 2013 11:53 pm
by evanso1975
The only real difference I can see is the M38 one has slotted holes (so you don't need to completely remove the bolts to take it off):
http://g503.com/forums/viewtopic.php?f=105&t=116217
For very little extra work, you could modify the holes on that CJ2A one to be more M38-ish.
Posted: Fri Apr 12, 2013 4:14 am
by Bretto
Yep.
I decided when I made mine to just leave them as holes instead of slotting then out. I doubt that I will ever take it off.
Heat Shield
Posted: Sat Apr 13, 2013 4:26 am
by G740
Just in case you guys did not know it, I have new heat shields in stock for the MB/GPW, M38 and the M38A1 in their respective different configurations.
John
MWM