M-38 / M-38A1 Vent & Fuel Lines
Posted: Fri Jul 11, 2014 7:19 pm
I have figured out what the copper colored lines were made of for the vent lines and fuel lines...
It is NiCopp line material; the reason it is not used much anymore is its cost... $50 for a 25 ft roll of 3/16"...
My question is were the lines painted from the factory or left a copper color...
I am getting ready to run new vent, fuel and oil lines on a F-134 for my M-38A1 and am curious if I need to paint them before installation...
Thanks
It is NiCopp line material; the reason it is not used much anymore is its cost... $50 for a 25 ft roll of 3/16"...
My question is were the lines painted from the factory or left a copper color...
I am getting ready to run new vent, fuel and oil lines on a F-134 for my M-38A1 and am curious if I need to paint them before installation...
Thanks