Page 1 of 1
points/condenser parts number help
Posted: Mon Dec 29, 2014 5:29 am
by PaulB
Hi folks, I am looking for the current part numbers (at Napa/O'Reilly/etc.) for points and condenser for my '51 M38. It is the original 24volt system. I can't seem to find an old post with this information.
Thanks for the help...
points
Posted: Mon Dec 29, 2014 10:44 am
by buzzk
points m38 NAPA , PI-CS25A, PIHD-CS725A COND. AL869, ROTOR AL69 THESE ARE ALL NAPA PART # BUZZZ
Points and condensor question
Posted: Mon Dec 29, 2014 11:10 am
by WESTCOMVIC
Are these Napa parts # applicable for a 53 M38A1?
Posted: Mon Dec 29, 2014 12:38 pm
by wesk
A lot of the cross reference data will show all internal parts the same between MB, M38, M38A1/M170 but that is not entirely true. Safe bet is to just use your M38 or M38A1 ORD 9 parts manual (download it free here on our "Downloads" page) and research your distributor parts starting with the correct auto-lite or delco part number.
The three Auto-Lite distributors used in the M38/M38A1/M170 from 1950 thru 1971 are much the same except for advance curves (springs & weights) and the first distributor used an external noise filter (capacitor) mounted on the firewall and had a different conduit connection at the distributor.
points
Posted: Mon Dec 29, 2014 3:34 pm
by buzzk
according to Dennis Spence they are all the same MB-M38A1
Posted: Mon Dec 29, 2014 3:39 pm
by wesk
I have used Dennis Spence's 1980 guide for years but if you do your homework you will find the errors.
If the book wasn't copyrighted I would posts scans of all the pages in mine with their updates and corrections.
Posted: Tue Dec 30, 2014 5:24 am
by PaulB
Thanks guys for replays. I'll get them ordered today!
Posted: Thu Jan 01, 2015 10:03 am
by PaulB
Buzz shot you a PM, just wanted to make sure you got it.
Also I picked up the AL69 and they are the wrong rotors, see link below.
http://www.napaonline.com/Catalog/Catal ... 0460149665
What is the number for the correct one?
Thanks again for the assistance!